actidata Storage Systems GmbH
–
D-44149 Dortmund
–
Wulfshofstr. 16
3. Getting started
After you have got the overview of the individual components and interfaces of the actidata Ti-
NAS QT, the system can be started. Therefore connect a monitor to the VGA connection on the
back of the actidata system. There are USB 3.0 interfaces for keyboard and mouse on the back.
After the system has been connected to power, the system can be put into operation. Set the
power supply on the rear to ON. The actidata system starts the power-on routines by pressing
the power-on switch on the front.
If an operating system (e.g. Windows Server for IOT) is installed, it is located internally on the
M.2 SSD. You can connect via RDP (Remote Desktop). The access data, the defined network IPs
can be found in the
enclosed document „
Important I
nformation“
, the license key is located on
the left side of the product.
If the Windows Storage Server for IOT operating system is pre-installed, the login screen
appears. After logging into Windows Storage Server, the system can now
…
•
…
be integrated into the existing IT network.
•
… manage the RAID
-configuration of the installed hard drives. To do this, the
MegaRAID management program must be started.
Login / Password
administrator / <System-Password>
If no operating system is preinstalled, please refer to the information paper
„OS
installation
“
.
