actiLib Library 4U
– User and Service Guide
Page 76 of 103
8.2.1 Removing stuck tapes from slots
1.
Unlock the magazine and remove it from the Library
Use the OCP, see section 9.7, or
use the RMU, see section 9.8
2.
The finger holes on the back side of the magazines (see Figure 56) allow the user to pull
the cartridges out of the slot. Remove and insert the cartridge mechanically. Repeat the
process ten times.
Figure 56 Removing stuck tapes from slot
3.
During this process the burr will be removing.
4.
Insert cartridge in the magazine
5.
Put the magazine back to the tape Library.
Summary of Contents for actiLib Autoloader 4U
Page 40: ...actiLib Library 4U User and Service Guide Page 40 of 103 Figure 24 Interaction Mode Commands ...
Page 43: ...actiLib Library 4U User and Service Guide Page 43 of 103 Figure 27 Interaction Mode Service ...
Page 60: ...actiLib Library 4U User and Service Guide Page 60 of 103 Figure 40 Configuration license key ...
