www.acti.com
Hardware Manual
18
Using a Power Adapter (Optional)
The camera can be powered by a Power over Ethernet (PoE) switch that is IEEE802.3af
compliant. In case of using a non-PoE switch or your PoE switch has limited power supply, you
can purchase a power adapter and directly connect the camera to a power outlet.
After connecting the power adapter, wrap the cable connection with waterproof tape to ensure it
is protected.
NOTE:
The power adapter is not bundled in the package.
CAUTION:
The cable connector must not be exposed and must be kept away from water. If the
cable will not be used, make sure to insert the plug to cover the cable interface. Then put the
cable inside a waterproof junction box or completely wrap with waterproof tape.
Waterproof Other Cables
After routing and connecting the cables, use waterproof tape to wrap up the cables. Connected
cables and spare cables should all be wrapped up for protection.
DC interface
Plug
