www.acti.com
Hardware Manual
21
Installing the Camera Using the Tilted
Mount
This section describes the procedures in mounting the camera on the wall with a 45° tilt angle
using the bundled tilted mount. The tilted installation allows the camera to be installed on high
walls but still cover more of the floor area. The main unit can be installed apart from where the
camera is mounted, like in a secured area or separate room.
Before installation, consider the following:
Camera cable length: 12 meters
Mounting location of camera and the main unit can be separate
Step 1: Install the Tilted Mount
1.
Attach the bundled Tilted Mount drill template sticker on the target installation surface. Drill
the two (2) screw holes and use the screw plugs, as needed.
2.
Secure the tilted mount to the wall with two (2) screws.
