![background image](http://html1.mh-extra.com/html/acti/outdoor-hemispheric/outdoor-hemispheric_installation-manual_2842603004.webp)
Installation Guide
3.
Install the tilted mount using the two (2) supplied screws.
Step 2: Prepare the Camera
1.
If the cables will pass through the wall
, remove the cap covering the bottom hole of the
camera, and attach the cap to the side hole to close it. The network cable will pass the
bottom hole to the camera.
If the cables will be routed along the wall
, skip this step.
2.
Loosen the three (3) screws using the supplied hex wrench.