www.acti.com
Hardware Manual
21
documentation or contact the manufacturer to verify the corresponding pin labels and
ensure proper wiring connection.
CAUTION:
Incorrect wiring may cause damage to the connected devices.
DISCLAIMER:
ACTi will not be responsible for any damage caused by improper wiring.
2.
Connect a ground wire to one of the GND terminal pins of your camera (via Power or DI/O
terminals) to complete the connection.
For more information on connecting PT scanners, please refer to the Knowledge Base article:
Pan and Tilt Scanner for ACTi Zoom Cameras
(http://www.acti.com/support/KnowledgeBase/outside/detail.asp?KB_ID=KB20110120001)
available on the website.
