Hardware Manual
Installation Procedures
Installation procedures vary depending on the desired mounting solution. Cables may need to be
be connected first before mounting the camera or vice versa. Below are basic installation
procedures, however for more detailed information, download the Installation Guide from the
website (
http://www.acti.com/mountingselector
).
Below are the basic installation procedures when mounting the camera with PMAX-0312 Wall
Mount with access behind the wall. For detailed information and other mounting solutions,
download the Installation Guide from the website (
http://www.acti.com/mountingselector
).
NOTE:
The following pictures are for reference only, actual camera and cable connections may
slightly vary.
Mount the Camera
1.
Install the Mounting Solution
Check the Installation Guide for detailed information. The safety strap may be attached during
this process. Below is an example of attaching the safety strap using the PMAX-0312 wall mount.
2.
Insert the Cable
Insert the camera cables through the mounting accessory (e.g. PTZ wall mount, straight tube,
extension tube, etc.) and through a hole in the wall or ceiling.
