www.acti.com
Hardware Manual
18
3.
Insert the clamping nut through the flex conduit.
4.
Insert the sealing rubber and attach it at the end of the flex conduit.
5.
Attach the conduit gland body to the hole of the camera.
Attach to Camera Side Hole
Attach to Camera Bottom Hole
NOTE:
The following images are taken using the side hole of the camera; the same
procedures apply when using the bottom side hole.
6.
If the
cables will be routed along the surface
, mount the camera to the surface first
before doing the succeeding cabling procedures. See
Step 4: Install the Camera to the
Surface
on page 20.
or
