www.acti.com
6
Firmware Version
: ENR-030-V5.03.01.01-AC
Release Date
: 2019.01.16
Reviewed Date
: 2019.01.16
Release Notes
Enhancement
1.
(v5.03.01.01) System stability improvement
Issue Solved
1.
(v5.02.02.02) Connection issue when camera is using public IP address
2.
(v5.01.02.01) Fix bug of quick playback on Soyal Access Control.
Removed
1.
(v5.01.03.01) Removed the SMS setting page.
Remark
1.
Please connect monitor before you power on the ENR server.
2.
ENR can assign DHCP IP address automatically for cameras within LAN
via LAN1 port. For this DHCP server feature, please power on ENR
completely first, then boot up cameras.
3.
Please make sure IP cameras and ENR are connected to the same
network before performing Auto Add cameras operation.
4.
Motion detection setting is not available when camera is in ePTZ stream
mode or channel ID 2 in dual stream mode.
5.
Not support Video Loss events from the video servers
6.
Not support "MD Preset
” stream mode
7.
Not support email attachment with snapshot via Event function if
camera resolution or compression is not supported on Local display.
8.
To display on Mobile Client through ENR server only accept the camera
using H.264, H.264 video compression and 1920 x 1080 or below
resolution.
9.
Some of SMTP service providers upgraded the SSL/TLS versions will
cause sending event mail problem from ENR. If you wish to use a free
webmail SMTP service, you may choose certain webmail providers
such as Yandex(https://mail.yandex.com/).
10.
Please find the compatible hard disks with ACTi standalone NVR
products via ACTi Hard Disk Selector(https://www.acti.com/hddselector)
11.
The video recording will include the audio from camera to ENR but
without from ENR to camera.
12.
Some of user interface had not been translated completely into multiple
