![background image](http://html.mh-extra.com/html/acti/e44a/e44a_hardware-manual_2842401026.webp)
Hardware Manual
The illustration below is a graphic example of connecting a relay to a high voltage DO device.
Relay
(DO1 Device)
)
Camera
Illuminator
110V-220V AC
External Power
Source
NOTE:
For more information on DI/DO connections, please refer to the Knowledge Base
All about Digital Input and Digital Output
downloadable from the link below
http://www.acti.com/kb/detail.asp?KB_ID=KB20091230001
How to Connect Audio Input / Output Devices
(Optional)
If using an audio input device, such as a microphone with a built-in amplifier, connect the
device to the
Audio Input
jack (RED) of the camera. If using an audio output device, such as a
speaker, connect the device to the
Audio Output
jack (GREEN) jack of the camera.
NOTE 1:
Make sure that the connected audio input device has a built-in amplifier. Connecting
an ordinary microphone will dwarf sounds and will result in inaudible recording.
NOTE 2:
If the audio connectors will not be used, leave the rubber caps on to ensure cables
remain waterproof and eliminate short-circuit hazards.
Audio Input
Jack
Audio Output Jack
Audio Device