www.acti.com
Hardware Manual
9
Installation Procedures
If there is a need to install a memory card for local storage recording, insert the memory card
to the camera first before mounting the camera. See
How to Install / Remove the Memory
Card (Optional)
on page 16 for detailed instructions.
Step 1: Install the Camera
1.
Mark the screw holes or attach the bundled drill template on the target surface.
NOTE:
Depending on the surface where you will install the camera, it may be necessary to
drill three (3) holes and use the supplied screw tox.
2.
If the cable will pass through the surface
, drill a Ø 22mm cable hole within the radius of
the camera bracket.
If the cable will be routed along the surface,
route the cable
through the gap on the bracket.
3.
Mount the camera to the surface using the three (3) screws.
