www.acti.com
ACM-3001 Hardware User’s Manual
17
Basic Connections
Follow the procedures below to connect the IP PoE Fixed Dome Camera to the respective
apparatuses.
If you have a PoE(Power over Ethernet) supported switch or injector:
1) Connect your IP Camera to the Switch / Injector by CAT5 or CAT6 cables with RJ45
connector.
2) Connect your Switch / Injector to PC with another CAT5 / CAT6 network cable.
If your switch does not support PoE, and you are powering the camera with power
adaptor:
1) Connect the power adaptor to IP Camera
2) Connect IP PoE Fixed Dome Camera
’s Ethernet port to Network switch (via RJ45
connectors).
3) Connect a PC to the Ethernet switch (via RJ45 connectors)