1-6
1.4 Physical
Description
1.
Audio Input / Output
The IP device supports audio input and output with earphone jack
2.
Power Input
If your power input is DC12V , please follow the description on
the connector to connect to power.
3.
Ethernet Port
The IP device connects to the Ethernet via a standard RJ45
connector. Supporting NWAY, this IP device can auto detect the
speed of local network segment (10Base-T/100Base-TX
Ethernet).
4.
Reset Button
Step 1:
Switch off IP device by disconnecting the power cable
Step 2:
Press and continue to hold the Reset Button. Reconnect the
power cable while continuing to hold the reset button.
Step 3:
Keep holding the reset button depressed for a while,
PIN NAME DESCRIPTION
1
12V
DC Power Input
2 GND
Ground
Pin