1-9
1.4 Physical Description
1.
Channel Number
2.
Action LED Indicator
The LED will light up after this video channel has successfully
completed the boot process.
3.
LAN LED Indicator
The LEDs indicating when this video channel is transmitting data.
4.
Serial Port LED Indicator
LEDs indicating when serial port is active.
5.
Video Input
Each channel supports one analog video input of composite signal
with BNC connector
6.
Reset Button
Step 1:
Switch off 16-channel MPEG-4 1U Video Encoder by
disconnecting the power cable
Step 2:
Using a suitable pointed object, press and continue to hold
the Reset Button depressed. While continuing to hold the reset
button depressed, reconnect the power cable.
Step 3:
Keep holding the reset button depressed around 6 seconds,
release the reset button. The unit will start up with factory default
settings.
7.
ETHERNET Port
The 16-channel MPEG-4 1U Video Encoder connects to the
Ethernet via a standard RJ45 connector. Supporting NWAY, this
16-channel MPEG-4 1U Video Encoder can auto detect the speed
of local network segment (10Base-T/100Base-TX Ethernet). The
Ethernet port is for FTTH and can connect to a xDSL or cable
modem.