www
.
ac
t
a
vo.
c
o
m
BoSS
SOLO
700
USER GUIDE
FREEPHONE: 0800 214 005
Assembly Procedure
To comply with the ‘Work at Height Regulations’ we
show assembly procedures with platforms every 2
metres in height and the locating of guardrails in
advance of climbing onto a platform to increase safety
and reduce the risk of a fall.
Never stand on an unguarded platform positioned above
the first rung of a tower. If your risk assessment shows
it necessary, you may also need to guardrail platforms
at this level.
The pro
c
edure illustr
a
ted sho
w
s
6
.2
m
working
height to
w
er
.
The BoSS Solo system has been developed so that a single
person can safely build the platform tower to a platform height of
4.2m.
1
Insert castor into adjustable leg, apply brake by pushing the
lever down, release frame interlock clips and fit the leg and castor
assembly into a 1m base frame. Repeat with the remaining legs
and castors. Adjustable legs should only be used for levelling.
Assembly Procedure
2
Release brakes on castors at one end frame until the
locks will engage on the rear folding frame. Ensure both
hinges positively lock into position. Engage brakes on
second frame.
3
Locate the horizontal brace on the lowest rung with the
hooks facing downwards - check the brace is correctly locked on
the tube at both ends. Check the base unit is square and level
using a spirit level. Adjust legs only to level and not to gain
additional height.