ACT i90-100A, Application Software And Instructions, Page: 5 / 9

Parking , Battery is ready. NiMH and NiCD (battery could stay in this stage indefinitely without any
harm, Lithium batteries will re-start the charging process when battery self discharges to 3.6V/cell.
Rapid Charge comes after "Soft Charge" and runs until charging is terminated.
Soft Charge , come when new battery begins to charge. Usually 4 minutes for NiMH and NiCD
battery. If the battery is very weak this interval could be longer.
Waiting, come s after discharging (10min wait for cell balancing).
2. Battery Current In/Out;
Charge and Discharge current value.
3. Battery Voltage;
Actual battery voltage level.
4. Charge Voltage; Charger
Voltage value applied to be able to charge a specific Battery.
5. Capacity add;
Current/Capacity added to battery in charge.
6. Discharge Voltage; Charger
Voltage value applied to be able to discharge a specific battery.
7. Cyc;
Reconditioning cycles ( Up to 6 cycles available)
8. Battery Capacity;
Total true Capacity in mA
9. Battery Temp;
Thermistor Battery temperature in C
10. Phase Time;
Cycle time.
11. Max Current; Max default current.
12. Max Time; Predetermined time value allowed before automatic shut off timer.
13.# Cells;
Cell s within battery.
14. Battery Type; Chemistry (NiCD, NiMH, LiON,Li Polymer)
15.Ver; i90 Firmware Version.
16.Vin;
Charger Input DC Voltage.
17 . Battery SN; user assigned battery number.
Operation
1. Battery Charging;
Insert battery into its relative pocket on the i90 charger, the following screen
( picture #7 ) will reflect the insertion of 3 batteries and all batteries are in good
condition,
Picture # 7
Once the batteries are inserted charge process will be initiated automatically and
the Charger State will indicate ‘Soft Charge “.
At this point the following options are allowed:
2. Battery History Information.
Double click on the Serial Number (S/N) Field, the below screen will be open ( picture # 8 )
5