ACT GSE Q12, Installation Manual, Page: 22 / 40

710-00002.5
22
22
site, this step and the following step can be
performed off-site when internet connection is
available.
14. Reopen ACT-Link software, click on the Upload button. This will insure that the settings are
updated in ACT-View. This step could be done after leaving the customer site if there is no
internet connection at the site.
NOTE:
ACT Mobile Router is not internet based. It will not
connect to the cloud, it will just form a local area
network for ACT devices. To upload the data, you
need to be connected to a different network with
internet connectivity
Important:
All settings need to be uploaded to ACT-view.com to
insure future Replacements and Alerts are accurate.
The upload needs to be done with Internet
connection and can be done off-site. The upload can
be done when all device settings are completed for
the entire site. Skipping the upload step will cause
data discrepancy in ACTview records, which could
prevent the ACT Support Team from providing future
support.
4.2 Option II: Using Wi-Fi
Follow the steps below to launch the ACT-Link software, program the charger settings, and upload the
settings.
1. Turn on ACT Mobile Router