ACT GSE Q12, Installation Manual, Page: 14 / 40

710-00002.5
14
14
cable and cable strain relief need to have minimum
rating of type 3R, and designated for outdoor use.
NOTE:
The Q4 charger has an alternative knockout at the
bottom for AC connection
5. Connect the AC input power wires to the AC terminal block
6. The ground connection should be made to the charger to the compression lug provided under
the AC terminal block. The charger must be grounded in accordance with the Facilities Utility
grounding method.
Q6 and Q12 Chassis Q4 Chassis
7. Verify the line and ground connections of the outlet or junction box/disconnect.
8. Open the front cover to expose the Power Modules and check to ensure that all the Power
Modules are tightened and completely flushed on the chassis. Close the front cover after
inspection.
AC 3-Phase
connection
AC 3-Phase
connection
Ground (GND)
Connection
Ground (GND)
Connection