61
Insufficient water flow through condenser (tube in tube)
1. Check whether valves are opened.
2. Check for air is trapped in piping.
3. Check circulating pumps.
4. Check if correct water pump sizing.
Water dripping
1. Check condensate drain.
2. Check for dirty filter.
3. Check to see if condensate drain runs uphill.
4. See if blower motor is up to speed.
5. Check for blower position.
6. Are drain pipe properly trapped?
Noisy unit operation
1. Check for fan wheel whether it is hitting the housing.
2. Check if any dented fan wheel.
3. Check if there is loose fan wheel on shaft.
4. Check if any tubing is touching the compressor. Readjust tubing by bending slightly.
5. Check all screws on panels.
6. Check water flow rate.
Summary of Contents for AWH028C
