9
A5HDC-2009
Application Information
Controller
SLM
Operation Guide
COOL
DRY
HEAT
MED
HIGH
AUTO
MODE
TEMP
SENSOR
ON/OFF
SLEEP
LOW
TIMER
8
2
5
9
3
6
4
1
FAN
FAN
ON/OFF
TEMP
SLEEP
TIMER
MODE
7
1
2
3
4
5
6
10
7
SWING
SWING
FAN
1. “ON/OFF” switch
•
Press to start the air conditioner unit.
•
Press again to stop the unit.
2. Temperature setting
•
Set the desired room temperature.
•
Press button to increase or decrease the set
temperature. Setting range are between 16°C
to 30°C (60°F to 80°F).
3. Operation Modes
•
Press the “mode” button for select the type of
operating mode.
- Cooling Only : COOL, DRY, FAN
- Heat Pump : AUTO, COOL, DRY, HEAT, FAN
(AUTO mode is represented by both COOL
and HEAT LED light on)
4. Fan Speed selection.
•
Press the button until the desired fan speed is
achieved.
5. Timer.
•
Press the set button to select the switch timer
of the air conditioner unit (the setting range is
between 1 to 10 hours).
6. “Sleep” mode
•
Press button to activate the sleep function can
only be activated under “cool” or heating
mode operation. Activated under “cool” mode
operation, the set temperature will increase
0.5°C after 30minutes, 1°C after 1 hour and
2°C after 2hours. If it is actiaved under
“HEAT” mode operation, the set temperature
will be descreased 0.5°C after 30 minutes,
1°C after 1 hour and 2°C after 2 hours.
7. Air Swing
• Press button to activate the automatic air
swing function.
8. Sensor
• Infra red sensor to receive signals from
wireless controller.
9. LED Display
• To display the set temperature (in °C) and
timer delay setting (in hours).
10. Transmission source
• To transmit signals to the air conditioner.
