S76G/S78G Commands Set Reference
v1.6.5
July 2, 2018
11 of 73
Product Name
Version
Doc No
Date
Page
To quickly start using S76G/S78G EVB, the 1
st
step is using USB cable to connect EVB to
PC/NB via micro USB port. The next step is checking whether the UART-To-USB bridge IC driver
can be properly installed on PC/NB. By using win7/win10, the UART-To-USB bridge IC driver
could be installed automatically and shows a USB serial com port after connecting well between
EVB and PC/NB via USB cable.
After successful installation of USB driver, you can use any terminal program (suggesting free
) to connect to EVB. The commands set can be used through the
terminal program.
By using
or other terminal software, be aware of not being appended nothing in the
end of a UART string (Figure 2.3).
Figure 2.3
