ACR330 User Manual
Version 1.00
www.acs.com.hk
Page 15 of 16
To access ACR330 using LAN:
1. On the LTE board, plug in
jumper
to enable console mode.
Note
: Jumper is not included in standard product.
2. Connect ACR330 to the Ethernet using a
LAN cable
. The exact location of the Ethernet port
at the back of the ACR330 is shown in the image below.
3. Connect ACR330 to the PC using the
RS232 debug console cable
. The exact location of the
RJ11 serial port at the back of the ACR330 is shown in the image below.
Note
: Connect the other end of the cable to the PC serial port or USB-RS232 converter.
Limited
