ACS A1208, Operation Manual

Page: 35 / 48

Ultrasonic thickness gauge A1208
Operation Manual
35
ACOUSTIC
CONTROL
SYSTEMS
2.3.4 MEMORY mode
In the MEMORY mode the screen in divided in two windows. In the upper window you see the information on the measure-
ment similar to the MONITORING mode (thickness, signal level, measurement method). In the lower part the information on the
previously saved results is indicated (groups, cells of groups and results). Here you also see the smallest and the biggest values
of the current measurement results (Figure 42).
Active keys:
F1 (to the last) go to the empty cell of the last existing group (the next cell after the recorded cell).
F2 (group) add a new or delete the last group.
F3 (min/max) deleting of the Min and Max values for the current mea-
surement.
save the measurement results in the current group. To record
results, it is possible to choose any existing group prior to the measurement
process or during it.
view and update the measurement results recorded in the device
memory.
2.3.4.1 Add a new or delete the last group
By pressing the key F2 the message “Add / + / new or delete last group?”
will appear on the screen (Figure 43).
Active keys:
F1 (-) delete the group.
F2 (Cancel) exit the window.
F3 (+) add a new group provided that the last existing group is not empty.
Figure 43 Figure 42
2