AR-B5432 series User Manual
15
NOTE 1:
CN7: Front panel connector.
When using
AT mode
in the system, the pin5-6 of header
CN7
must be shorted. If using
ATX
mode
in the system, the pin5-6 of header
CN7
should connect to a
Push-Button-Switch
.
NOTE: When using AT mode, the monitor will not display any message and
the system will not auto-shut down after soft-off. In this case, please cut the
PSU’s power off or remove PSU’s power to cut the system power off.
STATUS
SETTING
1
2
External buzzer.
1: Buzz +
2: Buzz -
3-4
Hardware reset
5-6
Power button for ATX mode;
jumper shorted for AT mode.