manualshive.com logo in svg

Acrosser Technology AR-B2104, Manual, Page: 2 / 18

Share
Download
Acrosser Technology AR-B2104 Manual Download Page 2

A C R O S S E R
T E C H N O L O G Y

2

RETURNING YOUR CARD FOR SERVICE

If your card requires servicing, contact the dealer from whom

you purchased the product for service information. If you need to

ship your card to us for service, be sure it is packed in a protec-

tive carton. We recommend that you keep the original shipping

container for this purpose.

You can help assure efficient servicing of your product by follow-

ing these guidelines:

1. Include your name, address, telephone and facsimile num-

ber where you may be reached during the day.

2. A description of the system configuration and/or software

at the time of malfunction.

3. A brief description of the symptoms.

TECHNICAL SUPPORT AND USER COMMENTS

User comments are always welcome as they assist us in im-

proving the usefulness of our products and the understanding of

our publications. they form a very important part of the input

used for product enhancement and revision.

We may use and distribute any of the information you supply in

any way we believe appropriate without incurring any obligation.

You may, of course, continue to use the information you supply.

Please send your comments to Acrosser Technology Co., Ltd.

or your local sales representative.

Summary of Contents for AR-B2104



















Reviews:

No comments