AR-B9673 User’s Guide
20
Onboard Parallel Mode
This field allows you to determine parallel port mode function.
SPP Normal Printer Port
EPP Enhanced Parallel Port
ECP Extended Capabilities Port
ECP/ EPP Both of Extended Capabilities Port and Enhanced Parallel Port
ECP Mode Use DMA
This option is only available if the setting for the parallel Port Mode option is ECP
Parallel Port EPP Type
The item selects the EPP version used by the parallel port if the port is set to EPP mode.
Settings:EPP1.9, EPP1.7
On-board FDD Controller
This option enables the floppy drive controller on the AR-B1673
On-chip USB
This setting is used to enable/disable the onboard USB controller.
5.5 PNP/PCI CMOS SETUP
This section is used to configure PCI / Plug and Play features. The <PCI & PNP Setup> option configures the PCI
bus slots.
Power Management
Reset Configuration Data
This field allows you to determine whether or not to reset the configuration data. The default value is Disabled.
Resources Controlled by
This PnP BIOS can configure all of the boot and compatible devices automatically. However, this capability
needs you to use a PnP operating system such as Windows 95. The default value is Auto[ESCD].
