AR-B9673 User’s Guide
18
Halt On
This field determines whether the system will halt if an error is detected during power up.
No errors The system boot will not be halted for any error that may be detected. (Default)
All errors Whenever the BIOS detect a non-fatal error, the system will stop and you will be prompted.
All, But Keyboard The system boot will not be halted for a keyboard error; it will stop for all other errors
All, But Diskette The system boot will not be halted for a disk error; it will stop for all other errors.
All, But Disk/Key The system boot will not be halted for a key- board or disk error; it will stop for all others.
5.3 ADVANCED CMOS SETUP
Advanced CMOS Setup
Quick Power On Self Test
When enabled, this field speeds up the Power On Self Test (POST) after the system is turned on. If it is set to
Enabled
, BIOS will skip some items.
Full Screen LOGO Show
This itemenables you to show the company logo on the bootup screen. Settings are:
Enabled Shows a still image(logo) on the full screen at boot.
Disabled Shows the POST messages at boot
Swap Floppy Drive
This item allows you to determine whether or not to enable Swap Floppy Drive. When enabled, the BIOS swaps
floppy drive assignments so that Drive A becomes Drive B, and Drive B becomes Drive A. By default, this field is
set to
Disabled.
USB Keyboard Support
Select
Enabled
if your system contains a Universal Serial Bus (USB) controller and you have a USB keyboard.
PS/2 Mouse Function
This item enables or disables the IRQ12 for PS/2 mouse.
Init Display First
This setting specifies which VGA card is your primary graphics adapter. Setting options are:
PCI Slot The system initializes the installed PCI VGA card.
