~
Page 41 ~
5-6. PCI/PLUG AND PLAY
This section is used to configure PCI / Plug and Play features. The <PCI & PNP Setup> option configures
the PCI bus slots. All PCI bus slots on the system use INTA#, thus all installed PCI cards must be set to
this value.
BIOS: PCI / Plug and Play Setup
Plug and Play Aware O/S
Set this option to
<
No
>
if the operating system installed in the computer is Plug and Play-aware. The BIOS
only detects and enables PnP ISA adapter cards that are required for system boot. The Windows 95 (and
above) operating system detects and enables all other PnP-aware adapter cards. Windows 95 (and above)
is PnP-aware. Set this option to
<
yes
>
if the operating system (such as DOS, OS/2, Windows 3.x) does not
use PnP. You must set this option correctly or PnP-aware adapter cards installed in your computer will not
be configured properly.
Reset Configuration Data
This sets the operating mode of the boot block area of the BIOS FLASH ROM to allow programming in the
Yes
setting.
PCI Latency Timer (PCI Clocks)
This option sets latency of all PCI devices on the PCI bus. The settings are in units equal to PCI clocks.
Primary Graphic Adapter
This option is set to use PCI bus or AGP. The AGP mode will get system a faster processing speed.
AMIBIOS SETUP - PCI/PLUG AND PLAY SETUP
( C ) 2000 American Megatrends, Inc. All Rights Reserved
Plug and Play Aware O/S
NO Available
Options
Reset Configuration Data
NO
NO
PCI Latency Timer (PCI Clocks)
64
YES
Primary GraphicS Adapter
PCI
PCI VGA Palette Snoop
Disabled
DMA Channel 0
PnP
DMA Channel 1
PnP
DMA Channel 3
PnP
DMA Channel 5
PnP
DMA Channel 6
PnP
DMA Channel 7
PnP
IRQ 3
ISA/EISA
IRQ 4
ISA/EISA
IRQ 5
PCI/PnP
IRQ 7
ISA/EISA
IRQ 9
PCI/PnP
IRQ 10
ISA/EISA
IRQ 11
ISA/EISA
IRQ 12
PCI/PnP
IRQ 14
ISA/EISA
IRQ 14
PCI/PnP
ESC:Exit
↑↓
:Sel
IRQ 15
PCI/PnP
PgUp/PgDn:Modify
Reserved Memory Size
32K
F2/F3:Color
Reserved Memory Address
CC000