manualshive.com logo in svg

Acrosser Technology AR-B1660, Operation Manual, Page: 3 / 50

Share
Download
Acrosser Technology AR-B1660 Operation Manual Download Page 3

  

 

 

~ 

Page iii ~ 

 

1. INTRODUCTION .............................................................................. 1

 

1-1. ABOUT THIS MANUAL ...................................................................... 2

 

1-2. SYSTEM SPECIFICATION ................................................................... 3

 

1-3. SAFETY PRECAUTIONS ..................................................................... 4

 

2 Technical Summary .......................................................................... 5

 

2-1. INTERRUPT MAP .......................................................................... 6

 

2-2. RTC & CMOS RAM MAP ..................................................................... 7

 

2-3. TIMER & DMA CHANNELS MAP ............................................................... 8

 

2-4. I/O & MEMORY MAP ....................................................................... 8

 

3. HARDWARE CONFIGURATION ................................................................... 10

 

3-1. JUMPER & CONNECTOR QUICK REFERENCE TABLE .............................................. 11

 

3-2. COMPONENT LOCATIONS ................................................................... 12

 

3-3. PACKING LIST .......................................................................... 12

 

3-4. HOW TO SET JUMPERS .................................................................... 12

 

3-5. RS232/485 SELECTION ................................................................... 13

 

3-6. DOC MEMORY ............................................................................ 13

 

3-7. SYSTEM CLOCK SELECT AND CPU SETTING ................................................... 14

 

3-8. SERIAL PORT A~D CONNECTOR (CN11) ...................................................... 14

 

3.9. PC/104 Connector ...................................................................... 15

 

3-10. Parallel Port Connector (CN8) ........................................................ 17

 

3-11. FLOPPY DISK DRIVE CONNECTOR (CN7) .................................................... 17

 

3-12. HARD DISK DRIVE (IDE) CONNECTOR (CN2,CN6) ............................................ 18

 

3-13. LCD CONNECTOR FOR 36Bit (CN1) ........................................................ 19

 

3-14. EXTERNAL KEYBOARD & MOUSE CONNECTOR (CN16) ........................................... 21

 

3-15. RESET SWITCH (J1) .................................................................... 21

 

3-16. LED (LM1) ............................................................................ 21

 

3.17. INFRARED CONNECTOR (J5) .............................................................. 21

 

3-18. EXTERNAL SPEAKER HEADER (J11) ........................................................ 22

 

3-19. Ethernet RJ-45 Connector (CN12) ...................................................... 22

 

3-20. VGA CRT CONNECTOR (DB1) .............................................................. 22

 

3-21. POWER CONTROL CONNECTOR (CN15) ....................................................... 23

 

3-22. UNIVERSAL SERIAL BUS CONNECTOR (J7) .................................................. 23

 

3-23. CPU FAN POWER CONNECTOR (J2) ......................................................... 23

 

3-24. BATTERY JUMPER(JP6) .................................................................. 23

 

3-25. DOC SOCKET (U3) ...................................................................... 24

 

3.26. SERIAL PORT A~D SELECT (JP7~JP10) .................................................... 24

 

3.27. POWER ON CONNECTOR FOR ATX POWER SUPPLY (JP3) ........................................ 24

 

3.28. 26-PIN AUDIO CONNECTOR (CN9) ......................................................... 24

 

3.29. POWER CONNECTOR (CN3) ................................................................ 25

 

3.30. HDD LED HEADER (J3, J12) ............................................................. 25

 

3.31. LCD POWER (JP1) ...................................................................... 25

 

3.32. CPU SETTING SYSTEM BUS CLOCK (JP4) ................................................... 26

 

3.33. RS-485 Header (J14) .................................................................. 26

 

3.34. PCI SELECT (JP12) .................................................................... 26

 

3.35. Touch screen Connector (J15) ......................................................... 26

 

4. SOFTWARE UTILITIES ....................................................................... 27

 

4-1. Utility CD File ....................................................................... 28

 

4-2. SETUP ................................................................................. 28

 

5. AMI BIOS SETUP ........................................................................... 29

 

5-1. BIOS SETUP OVERVIEW ................................................................... 30

 

5-2. STANDARD CMOS SETUP ................................................................... 31

 

5-3. ADVANCED CMOS SETUP ................................................................... 32

 

5-4. ADVANCED CHIPSET SETUP ................................................................ 36

 

5-5. POWER MANAGEMENT ...................................................................... 39

 

Summary of Contents for AR-B1660



















































Reviews:

No comments