AR-B1641 User’s Guide
31
4.8 PERIPHERAL SETUP
When you select the “PERIPHERAL SETUP” on the main program, the screen display will appears as:
Peripheral Setup Screen
AMIBIOS SETUP – PERIPHERAL SETUP
© 2001 American Megatrends, Inc. All Rights Reserved
OnBoard FDC
Enabled
OnBoard Serial Port 1
3F8/COM1
OnBoard Serial Port 2
2F8/COM2
Serial Port 2 Mode
Normal
IR Duplex Mode
Half Duplex
IR Pin Select
IRRX/IRTX
OnBoard Parallel Port
378
Parallel Port Mode
Normal
EPP Version
N/A
Parallel Port IRQ
7
Parallel Port DMA Channel
N/A
Keyboard PowerOn Function
Disabled
ESC : Exit
↑↓
: Sel
Mouse PowerOn Function
Disabled
PgUp/PgDn :
Modify
On-Chip IDE
Both
F1:Help
F2/F3 : Color
Peripheral Setup options are displayed by choosing the Peripheral Setup icon from the WINBIOS Setup main menu. All
Peripheral Setup options are described in this section.
Onboard FDC:
This option enables the floppy drive controller on the motherboard. The settings are Enabled or Disabled.
The Optimal default setting is Enabled. The Fail-Safe default setting is Disabled.
Onboard Serial Port1:
This option enables serial port 1 on the motherboard and specifies the base I/O port address for
serial port 1. The settings are 3F8h, 3E8h, or Disabled. The Optimal default setting is 3F8h. The Fail-Safe default
setting is Disabled.
Onboard Serial Port2:
This option enables serial port 2 on the motherboard and specifies the base I/O port address for
serial port 2. The settings are 2F8h, 2E8h, or Disabled. The Optimal default setting is 2F8h. The Fail-Safe default
setting is Disabled.
Serial Port2 Mode:
This item sets the operation mode for Serial Port 2 (COM 2). Settings: Normal, 1.6 uS,3/16 Baud
and ASKIR.
Select Duplex Mode:
Two options are available: Full and Half. The default setting is Full. This item lets you choose the
operation mode for your IR KIT. Some IR device only can work at half duplex mode. Refer to your IR KIT user’s guide to
find out which setting is correct.
IR Pin Select:
Selection of EPP Version
Onboard Parallel Port:
This option enables the parallel port on the motherboard and specifies the parallel port base I/O
port address. The settings are 378h, 278h, or Disabled. The Optimal default setting is 378h. The Fail-Safe default
setting is Disabled.
