Acronis TrueImage Deluxe
33
The program will remember the position and the size of the partition that you
have entered this way and will use them when creating the transformation
scenario.
1.5.5 Informative
Elements
Aside from controls TrueImage Deluxe uses elements that inform you about
some parameters of hard disk structure and the actions the program
performs.
Hard Disk and Partition Parameters
On the picture you can see the parameters of a hard disk as they are
displayed by the TrueImage Deluxe program.
Here you can see the structure of hard disk #1; its capacity is 27.96 GB.
There is one primary partition on the disk (yellow; color codes are explained
in the bottom part of the picture) with FAT32 file system and SYSTEM
partition label and set of logical partitions. Some disk space is unallocated.
The above-described presentation of hard disk structures is used in Wizard
pages that prompt you to select source and destination disks.
The colors that show primary and extended partitions, and unallocated disk
space can be changed. Click the desired element (or move focus to it by
pressing the
Tab
or
Shift+Tab
keys, and press the
Enter
key afterwards).
Color setting dialog opens. Here you can either select the desired color from
the samples in the lower part of the window by clicking the color you like and
pressing the
Accept
button (you can also select the desired sample by
moving focus to it with
Tab
or
Shift+Tab
keys and pressing the
Enter
key), or create your own color by moving the Red, Green, and Blue sliders in
the upper part of the window until the color in the rectangle to the right suits
you. Press the
Accept
button to finish color selection.
