9
Copyright © Acronis, Inc., 2000-2010
Specifies that the component will be installed for the current user only, rather than for all users
on a machine.
This parameter is not effective for Acronis Backup & Recovery 10 Agent for Windows, which runs
as a service.
Avoid using this parameter when installing the component through Group Policy, because the
“current user” in such installation is typically a system account.
/target_dir
Installation_Folder
Specifies the folder where to install the component. Without this parameter, the component will
be installed to the default folder: %ProgramFiles%\Acronis\BackupAndRecovery
Agent-specific parameters
The following parameters are effective only when installing Acronis Backup & Recovery 10 Agent for
Windows.
/serial
License_Key
Specifies the license key to use when installing the package. A license key is a sequence of letters
and numerals separated by dashes. Enter the license key exactly, including the dashes.
/old_serial
Echo_License_Key
When upgrading from Acronis True Image Echo, specifies the license key for that edition. Use
this parameter with the
/serial
parameter.
/online_backup
Specifies that the agent will be installed for online backup only. A license key is not required.
Note:
Specify either the
/serial
parameter or the
/online_backup
parameter, but not both.
/account
User_Name Password
Specifies the user name and password of the user account under which Acronis Managed
Machine Service will run on the machines. The user account must have appropriate privileges, as
described in Specifying credentials for Acronis services (p. 6). Separate the name of the domain
and the account by a backslash, as in:
mydomain\User
Without this parameter, the agent will run under the default account:
Acronis Agent User
/cep_enabled
Specifies whether the machine will participate in the Customer Experience Program.
With this parameter, information about the hardware configuration, the most and least used
features and about any problems will be automatically collected from the machine and sent to
Acronis on a regular basis. The terms of participation can be found on the Acronis Web site.
Without this parameter, the information will not be sent.
3
Upgrading from trial to full product version
The trial key required at installation can be obtained on the Acronis Web site.
The Acronis Backup & Recovery 10 trial version has the following limitation:
Universal Restore functionality is disabled.
Additional limitations for bootable media:
