![acrilan Professional Vapor X15 Use And Installation Manual Download Page 11](http://html1.mh-extra.com/html/acrilan/professional-vapor-x15/professional-vapor-x15_use-and-installation-manual_2841093011.webp)
- 11 -
boiler maintenance
CLEANING THE BOILER
VAPORISER
In order to bene t fully from maximum performance dur-
ing your Turkish bath, it is highly recommended to clean the
steam-generating boiler once a year (or every 30 hours or so
of operation).
To clean the boiler, the following is necessary:
1 - Make sure the appliance is turned o before treatment.
2 - Dilute the bottle of descaler supplied with the shower in
1.5 litres of water.
3 - Pour the solution into the boiler along the duct situated
on the short side of the shower.
N.B. Unscrew the cap and close it.
(see gure)
4 - Allow the solution to rest for approximately 12 hours.
5 - Start the
Turkish bath
and allow it to run for about 5-8
minutes in order to remove any scale residue from the
boiler.
H
2
O
l
. 1,5
Descaler
CAUTION:
During operation, always keep the tank cap on completely to avoid harming people and dam-
aging the appliance.
During operation STAY AWAY from the steam dispenser.
warranty
GENERAL WARRANTY
TERMS AND CONDITIONS
The manufacturer
guarantees its products for a period of 24 months
from the date of purchase.
The purchase may be proven by a scally valid document issued by
the retailer (till receipt, invoice or delivery slip or warranty slip on the
manual for use) which identi es the product purchased and the date of
purchase and/or delivery of the same.
For conformity defects which arise during the rst 6 months of the
product life cycle, the manufacturer undertakes to repair the defect at
no extra charge for the consumer.
From the seventh month to the twenty-fourth month of the warranty
period, in the event of non-ascertained conformity defects, consumers
shall have to pay for the call-out and the manufacturer shall continue
to pay for the labour cost as well as for any functional spare parts used.
On the other hand, in the event of ascertained conformity defects, not
even the cost of the call-out will be charged.
In the event of a dispute, the Court of the user’s place of residence or
domicile shall have jurisdiction.
In the event that the product - purchased in Italy - is installed in a Euro-
pean Union member country, the consumer can get in touch with the
local support reference person by contacting the manufacturer.
After the 24-month warranty period, all repairs shall be paid in full by
the consumer.
The manufacturer will not be held liable for any damage which may -
either directly or indirectly - be caused to property, or personal injury
or harm to animals ensuing from failure to observe all the instructions
provided in the purpose-provided manual and concerning the warn-
ings regarding installation, use and maintenance.
Please note that the manufacturer cannot be held accountable for de-
fects caused by external conditions and/or events such as (by way of
non-exhaustive example):
- insu cient capacity of electrical or plumbing systems;
- incorrect installation and/or maintenance carried out by unauthor-
ised sta ;
- negligence, inability to use and poor maintenance on the consum-
er’s part, compared to the instructions and recommendations in the
product instruction manual, which is an integral part of the sale con-
tract.
- The same applies for damage caused to the appliance by atmospher-
ic events and natural disasters (lightning, ooding, re, earthquakes,
etc.) or by acts of vandalism, or by circumstances which cannot be
ascribed as manufacturing defects.
The warranty also does not cover:
- actions undertaken to solve problems caused by negligence, acci-
dental breakage, tampering and/or damage during transportation
(scratches, bubbles, dents) when carried out under the consumer’s
responsibility;
- repairs carried out by unauthorised sta ;
- actions for operating demonstration, checks and routine mainte-
nance work (including cleaning activities) and everything which was
brought to the consumer’s attention at the time of the sale.