3
Pic 1 ASJ20 Shape and hole size Pic 2 ASJ10 Shape and Installation size
The specific size of the meter is shown in the table below.
type
Panel size (mm)
Shell size (mm)
Hole size (mm)
ASJ10
/
85*54*64 (length*width*height)
/
ASJ20
48*48 (Width*Height)
43.8*43.8*100 (width*height*depth)
45*45 (Width*Height)
4.2 Installation Instructions
4.2.1 Installation Steps
ASJ20 series instrument installation method is panel installation, both sides of the buckle
extrusion fixed, the specific operation is as follows:
1) On the switchboard, choose the appropriate place to cut the 45mm*45mm mounting hole;
2) Take out the remaining current relay and remove the fixed buckle;
3) Install the instrument into the distribution board, and then install it with a buckle.
The specific operation is shown in the figure below.
ASJ10 series meters are mounted by the standard DIN-35mm guide rail.