Acrel ASJ Series, Installation And Operation Instruction Manual

Page: 11 / 21

8
AKH-0.66L80 80mm 250A 1A:1mA
AKH-0.66L100 100mm 400A 1A:1mA
AKH-0.66L150 150mm 630A 1A:1mA
AKH-0.66L200 200mm 1000A 1A:1mA
AKH-0.66L-260*100II 265*104mm 1000A 1A:1mA
Note: Attention should be paid to the type of residual current transformer, the installation aperture and the rated current of the main
circuit to prevent the situation that the outlet cable or copper bar cannot all pass through the transformer. If the above type cannot be
satisfied, please contact us.
6 Typical applications
Panel installation Guide installation
7 Programming menu
This section and next section only applies to ASJ10L-LD1A
First Menu Second Menu Third menu Descriptions
Addr 1~247 none Address setting
bAUd
1200, 2400, 4800, 9600,
19200, 38400
none Communication Baud rate setting
AL Select a modified bit modified bit Rated residual operating current setting
AL.Pr Select a modified bit modified bit Prewarning operating current setting
rSt.P Select a modified bit modified bit
Percentage of alarm, prewarning operating
current return value
Td Select a modified bit modified bit Limit non-driving time setting
Mod
000,001,010,011,100,10
1, 110, 111
none
For details see attached table: Mod Menu
Description
Brk on/oFF none Disconnection alarm setting
LCd 0~9999 none
Backlight setting, 0: backlight is always
bright; 1~9999, backlight goes out after