4
Specifications
Environmental
• Operating Temperature: 0°C to 32°C
• Storage Temperature: 0°C to 65°C
• Humidity:
- 5% to 90% RH, Non-Condensing, for temperatures 0°C to 40°C
- 5% to 60% RH, Non-Condensing, for temperatures 0°C to 65°C
• Maximum Altitude of Operation: 3000m
• Maximum decibel level: 77 dB(A)
Electrical
• Motor Type: BLDC
- Motor Phase Voltage: 160 Volts Pulse DC @ Controller Supply Voltage of 120 RMS, or
320 Volts Pulse DC @ Controller Supply Voltage of 230 RMS
• Duty Cycle: The Nutrunners are intended for intermittent operation with recommended
duty cycles not to exceed 30%. Note: Actual maximum duty cycles are dependent upon
several factors including: Ambient Temperature, Tool Selection, Joint Conditions, Operating
Parameter Set Programming and Operator Handling. For optimum Duty Cycle
determination, please contact your authorized AcraDyne
®
Product Representative.
• Motor Speed Setting Guidelines - AcraDyne ToolWare software, when used with an AcraDyne DC controller,
offers a wide range of programming options. An experienced, trained person should be responsible for the
setup of these options. Tool Speeds should be set taking into consideration the maximum RPM output of the
given tool in use. Tools with Maximum Rated RPM below 30 should not be ran at speeds less than 100%.
Tools with Maximum Rated RPM above 30 may be ran at speeds less than 100% according to specific
application demands.
Physical
(AEP)
(AED)
(AEJ)
(AEF)
(AES)
MODEL
SERIES APPROX. TORQUE APPROX. SPEED WEIGHT LENGTH DIA. DRIVE SOUND LEVEL
(handle type) Nm ft-lb
rpm kg lb mm in mm in in
dB(A)
( )4(A)(B)66500A
6000
500
370
120
5.7 12.5
300
11.8
66
2.6
0.75
66
( )4(A)(B)66750A
6000
750
550
85
5.7 12.5
300
11.8
66
2.6
0.75
66
( )4(A)(B)771000A
7000
1000
750
65
5.7 15
300
11.8
66
3.0
1
66
( )4(A)(B)772500A
7000
2500
1850
25
8.1 17
328
12.9
76
3.0
1
66
( )4(A)(B)883000A1
8000
3000
2200
20
12.3 27
376
14.8
86
3.6
1
66
( )4(A)(B)883000A
8000
3000
2200
20
12.3 27
376
14.8
86
3.6
1.5
66
( )4(A)(B)884100A1
8000
4650
3400
12
12.3 27
376
14.8
86
3.6
1
66
( )4(A)(B)884100A
8000
4650
3400
12
12.3 27
376
14.8
86
3.6
1.5
66
( )4(A)(B)896500A
9000
6500
4800
7
15
33
457
18
101
4.0
1.5
66
( )4(A)(B)898100A*
9000
8100
6000
5
15
33
457
18
101
4.0
1.5
66
*Under development
Add “A” to part numbers for fixed gearcase models. Add “B“ to part numbers for clutched gearcase models.
