background image

10000 SE Pine St.      Portland, Oregon 97216      Phone: 1-800-852-1368

www.aimco-global.com

6

2.3. Electrical hazards

2.1. Information contained in this document

•   A basic prerequisite for safety-compliant handling and 

problem-free operation is knowledge of the basic safety 

information and safety regulations.

•  Also be sure to observe all local rules and regulations.

2.2. Owner responsibilities

The owner is obligated to only allow persons who are familiar 

with basic work safety and accident prevention rules and who 

have been briefed on proper workplace handling to work at 

this workplace. The safety-conscious work of personnel must be 

verified at regular intervals.

2.2.1. Personnel responsibilities

All persons who are tasked with working at this workplace are 

obligated, before beginning with work, to observe the basic 

regulations covering work safety and accident prevention.

2.2.2. Personnel training

Only personnel that have been trained and briefed in advance 

may work at this workplace.

Personnel responsibilities for installation, placement into service, 

operation, maintenance, and repair must be clearly defined.

Personnel still to be trained may only work at this workplace under 

the supervision of someone who is trained and experienced.

The device is designed using state-of-the-art technology 

and according to recognized safety standards. 

Nonetheless, operating the device can entail the risk of 

life-threatening injury to the user, third parties, or property.

The workplace is only to be used:

•  For intended purposes

•  If it is in proper and safe working condition

!

Only allow work to be carried out by an electrical 

specialist. Regularly check the electrical equipment. 

Rectify loose connections immediately.

2. Basic safety information

 ________________________

Summary of Contents for AB-C18110













Reviews: