Use this menu to set up the data speed 4800/9600/38400 baud.
NOTE:
This Configuration should be done from advanced user like installation technicians only.
Therefore you will find more details in the installation manual.
During the configuration process, the NAUTICAST™ is not operational.
GPS Settings (Service Password protected)
GPS Module:
The screen provides means to switch the GPS Module between the „<µBlox>
‟
or „<Jupiter>
‟
. You can
force the AIS to search again for the GPS Module installed. Selecting the wrong type of GPS module
may result in invalid position information and/or malfunction so that your AIS can not operate correct.
Select and with [Left] & [Right] arrows the option <SEARCH>to search which module is installed
Please mention the system will restart automatically when saving these setting later. .
Pos.Pinning:
The screen provides means to switch the position pinning function of the internal GPS receiver <On>
and <Off>. For vessels operating with SOG < 0,3 knots it is recommended to switch position pinning
Off
. Otherwise the internal GPS receiver may deliver wrong position information.
The data input field is fitted with the recommended default value (<on>). The M6 button is used for
toggling between the two modes of position pinning; the M5 button is used for saving the settings.
NOTE:
The system will be restarted after saving the settings.
Dynamic Keys: Sensor Settings
[M5] [Save]
Save Data Input
[M8]
[Back]
Return to Menu
Configuration
N48^12' E 16^26' |1> N/A|2> N/A|3>0.00nm
************* GPS Settings *************
GPS module : <Jupiter>
Pos. Pinning: On
NOTE: The system will restart
when saving these settings.
----------------------------------------
| Save | | | Back
56
Y1-03-0203 Rev. M
