Installation Manual : X-TENSION 350 Median
Ph 1800 724 172 or visit
www.acprod.com.au
December 2018
/ Page 16
Step 13 - Tightening the Cables
Only tighten the cables using the nuts at the Cable Bracket end (post 7) (Figure 28).
Do not
tighten the cable nuts at front of the Ground Anchor.
Tighten the cables until they are taut, i.e. they rest in the backside of the W-beam and do not
visibly sag between posts (Figure 29). There is no torque requirement for the cables.
Figure 28. Tighten cables at Cable Bracket end (post 7)
Figure 29. Tighten cables until they are taut
Step 14 - Attach Secondary Impact Head
Fit secondary head to main head by pushing sideways onto the main head as shown below
(Figure 30), until the holes in the gussets line up. Fix into place with either the 25mm pin and
pin lynch, or 2 M24 x 50mm bolts as shown (Figure 31).
Figure 30. Fit secondary head to main head
Figure 31. Fix secondary head into place
Summary of Contents for X-TENSION 350
Page 1: ...December 2018 ...