14
OMNISTAND™ USER MANUAL
COPYRIGHT © 2016, ACCELERATED CARE PLUS CORP., ALL RIGHTS RESERVED.
Putting on the pelvic safety strap
Caution
Risk of injury due to incorrectly adapted simple knee support!
Make sure that pelvic safety strap is not damaged (i.e. intact seams, stitching).
Make sure that pelvic safety strap is correctly positioned and safely attached to
buckles.
Do not use the OmniStand™ without a pelvic safety strap.
Note: Use OmniStand™ exclusively with pelvic safety strap. The pelvic safety strap safely supports the user's pelvis
in the back.
Premium Pelvic Safety Strap - Position the user in an optimal training position:
Attach belt buckles
G
in securing system
K
on stay tubes
o
Select the same position for left and right side
Make sure that buckle audibly clicks into place
Make sure that pelvic safety strap runs below stay tubes
Shorten pelvic safety strap by pulling on straps
H
on either side and a second set below
If necessary, lengthen pelvic safety strap by opening clamping locks
I
(upper or lower)
Basic Pelvic Safety Strap - Position the user in an optimal training position:
Attach belt buckles
G
in securing system
K
on stay tubes
o
Select the same position for left and right side
Make sure that buckle audibly clicks into place
Make sure that pelvic safety strap runs below stay tubes
Shorten pelvic safety strap by pulling on straps
H
on either side
If necessary, lengthen pelvic safety strap by opening clamping locks
I
K
K
