15
PROBLEM
Possible Cause
Oven does not operate.
Confirm oven is plugged into dedicated circuit.
Confirm oven is on grounded circuit.
(Contact electrician to confirm)
Check fuse or circuit breaker.
Oven operates intermittently or
HOT
shows in display.
Check air filter and discharge areas for obstructions.
If oven does not accept entries
when pad is pressed.
Make sure oven is on and preheated.
Open and close oven door. Press pad again.
If oven malfunctions or shows:
ERROR!
Error Code: 1
(example)
Oven control is equipped with a self-diagnostic system. Self-diagnostic
system alerts you if there is an error or problem. When electronic control
signals a problem, follow steps listed below.
1. Record number shown. (example of Error Code: 1 shown)
2. Unplug oven, wait for 1 minute, and plug in oven.
• Disconnecting electrical supply may eliminate service code. If failure
continues, contact an authorized servicer.
Oven fan turns on while oven is
not preheating or cooking.
Normal operation.
2014 ACP, Inc
225 49th Avenue Drive
Cedar Rapids, IA 52404
Part No. 20000606
Printed in U.S.A. Rev 3/14
Before Calling for Service
!
WARNING
To avoid electrical shock which can cause severe personal injury or death, do not remove outer case at any time.
Only an authorized servicer should remove outer case.
15
F
or full product documentation visit:
www.acpsolutions.com
