7. Base Removal
a) Remove 4 screws from front of the base - see figure 14.
b) Remove 4 frame mounting screws from rear of oven.
c) Slide hinges away from base and lift base from oven.
ACP, Inc. REV. 1
225 – 49TH Avenue Drive SW
DATE: 9-6-12
Cedar Rapids, IA 52404 PART #: 16200051
Page 5 OF 6
6. Turn Oven on Top
a) Rotate oven on its switch side being careful not to damage any loose components.
b) Rotate oven again so the oven base is on the top.
Figure 11
Mounting Clip
g) Remove cavity to base mounting clips or rear cavity support brackets LH & RH from
base of oven by accessing mounting screw thru air inlet on side of base - see figure 11
or figure 12.
Figure 12
Rear Cavity Support
Bracket
f) Install new switch cover onto secondary interlock switch using existing hex head
screws. (New switch cover is made of thicker material)
Note:
Make sure to align holes and interlock switch top with cover and tighten switch
cover to previous switch setting - see figure 9 and figure 10.
Figure 9
Figure 10
