ACP, Inc. REV. 1
225 – 49TH Avenue Drive SW
DATE: 9-6-12
Cedar Rapids, IA 52404 PART #: 16200051
Page 4 OF 6
5. Left Side of Oven
a) Remove 3 screws from LH partition panel and remove panel - see figure 7.
b) Remove terminal block mounting screw.
c) Remove grounding nut and ground wire, then remove ground lug from base.
d) Remove secondary interlock switch assembly by removing screw and sliding switch off
of hinge .
Figure 7
Partition Panel
Screw
Terminal
Block Screw
Ground Lug
Partition Panel
Screw
Partition Panel
Screw
Secondary Interlock
Screw
e) Remove secondary interlock switch mounting bracket cover by removing two cover
screws and lifting cover off of secondary - see figure 8.
Important:
Note the position of the alignment tab before removing cover bracket.
Figure 8
Cover Screws
Alignment Tab
