BASIC EFFORTLESS
™
HEADPHONE USAGE
Assemble charging mechanism (micro-USB into
Effortless
™
base*, USB into wall adapter**)
and plug USB adapter into
wall outlet.
Your Effortless
™
base will have
a solid orange light indicating
that it is ready to be used.
EFFORTLESS
™
CHARGING INSTRUCTIONS
1
2
3
WASHING INSTRUCTIONS
Open the hook and loop at the
back of the headband to reveal
the speaker components inside
the headband.
Remove the Bluetooth
®
module and then reach in to
remove the speakers, one at
a time, from the headband.
Once the speakers are
removed, you can machine-
wash the headband.
Reinsert one speaker at a time, and move each about four
inches from the hook and loop opening on either side of
the headband.
• Right speaker has red stitching
• Left speaker has green stitching
• Softer gray side should face towards the ear
• White side should face away from the ear
Then insert the Bluetooth
®
module into the headband and
close the hook and loop opening.
1
2
3
R
L
4
5
PAIRING YOUR EFFORTLESS
™
HEADPHONES
Remove the Bluetooth
®
module from the hook
and loop opening at the back of the headband.
Hold down the square
button for 5 seconds
until you hear
ascending tones
through the speakers
followed by a series of
double beeps and a fast
blinking red light. Must be
within 3 feet (1 meter) of
your device.
On your device, make sure
Bluetooth
®
is turned on. Look for
‘ACOUSTICSHEEP’ and select to
pair. Pairing may take up to 30 seconds.
1
2
3
3ft (1m)
5s
Power Off
: Press and hold the middle square button on the
Bluetooth
®
module for 3 seconds until you hear descending
tones through the speakers
Center Button
Up Arrow
Down Arrow
Bluetooth
®
Module
WEARING YOUR EFFORTLESS
™
HEADPHONES
Please Note
: The speakers
move inside of the headband,
independently of the headband.
Holding the headphones, you’ll notice the flat speakers –
one on each side – inside of the headband.
Place the headband on your head (tag
goes at the back of your head).
Once the headband is on,
adjust the speakers so they
are positioned directly over
your ears. This will ensure
great sound quality.
1
2
3
• When disconnecting the cord, grasp and pull the plug
and not the cord.
• Do not leave components in a wet or dirty headband.
• Wash your headband regularly (remove all components
before washing).
PROLONG THE LIFE OF YOUR HEADPHONES
Inserting the micro-USB into the base upside down could damage it and prevent it from charging.
Use only the cable and wall adapter provided.
*
**
Lay your Effortless
™
headband on the
base with the module
inside, buttons facing
down, and the plugs in
opposite directions.
Headband
(module inside)
Charging Base Cord
(in opposite direction
of speaker cord)
Speaker Cord
(in opposite direction
of charging base cord)
Solid :
Powered on, no device connected
Blinking
:
Effortless
™
is charging correctly
Blinking
:
Improper charging position
Solid
:
Effortless
™
is fully charged
Effortless
™
LEDs
Your Effortless
™
is charged when the
light on the base is solid green (it will
take approximately 3 hours to fully
charge).
LED
/
/
/
/
Skip Tracks
: Double click
arrows to skip tracks
Play/Pause
: Click the center
button once to play or pause
Power On
: Press and hold
center button for 5 seconds
Volume
: Click the arrows to
increase or decrease the volume
INSTRUCTIONS
Scan this QR code or visit
www.SleepPhones.com/instructions
to read this User Guide as well as Warranty Information and
Legal disclosures in additional languages.
ANLEITUNG
INSTRUCCIONES
ISTRUZIONI
INSTRUÇÕES
說明書
说明书
指示書
명령
تعليمات
