AXIOM BDA 04-2021
9
Place the washer with the „rim“ side down over the
thread hole.
You can also use the
special thumb knurl head screw
-
if you don’t need to cover the mounting hole later with
the (purely cosmetic) cover plate.
Please take one (1) of the 3 different height D29 mm
stainless steel mounting washers and a M5 screw which
is according to the washer.
For the smallest height washer take the shortest screw,
for the middle height the middle … etc.
Mounting the AXIOM
Place the screw through the mounting hole in the
AXIOM’s
mounting board.
Gently place the
AXIOM
- holding it at the VTA tower
like in the picture - over the plain top of the washer
holding the screw in the other hand.
