AXIOM BDA 04-2021
21
The
ULTRA LIGHT
adapter head of the
AXIOM Annyversary SME
allows for adjustment
of both - Azimuth and Overhang.
Either of the 2 adjustments is operated at the same
point and with a single lock.
The necessary lightness here to avoid resulting
excessive moving mass does ask for steady hands and
concentration in operating.
It is best to position the stylus OVER a tangential
template to know before the desired position.
To operate the lock-mechanism, the
AXIOM
Annyversary
SME
comes with a special Allen key to
open and re-lock the small lock-nut.
Please un-lock the small lock-nut with a 1/4 turn
counter-clockwise only and shift to the desired
position. Unlock very gently only, to avoid the lock
becoming too loose. A few tries will give you a good
feeling of the right amount of force applied.
Once achieved: lock again in place with 1/4 turn
clockwise.
While doing this the achieved position should be
secured by 2 fingers with gentle grip.
Any locking and un-locking shall be operated with
finger-force only - NOT with wrist force. Too much
force applied here may damage the light assembly.
The
AXIOM Annyversary SME
comes with a
different selection of main and secondary
counterweights.
This to counterbalance also higher weight integrated
headshell cartridges as well as heavier headshells.
Adjustments at SME-adapter
