ACOUSTIC SOLUTIONS LCD32761HDF Operating Instructions Manual Download Page 10

Page: 10 / 49

English

- 9 -

Viewing the Connections

RF Input

connects to an antenna or a cable.

Note  that  if  you  use  a  decoder  or  a  media  recorder,  you  should  connect  the  aerial  cable
through  the  device  to  the  television  with  an  appropriate  antenna  cable,  as  shown  in  the
illustration  below.

Video Input

is used for connecting video signals of external devices.

Connect the video cable between the

VIDEO IN

socket on the TV and the

VIDEO OUT

jack on

your device.

Audio Line Outs

output audio signals to an external device such as an optional sound

system.

To connect the external speakers to your TV, use

AUDIO LINE OUTS

of the TV with an audio cable.

YPbPr Audio Inputs

are used for connecting audio signals of a device that connects to the

TV via YPbPr.

Connect the audio cable between

AUDIO INPUTS

on the TV and audio outputs of your device

to enable component audio.

Component Video Inputs (YPbPr)

are used for connecting component video.

You can connect the component video and audio sockets with a device that has component
output. Connect the component video cables between the

COMPONENT VIDEO INPUTS

the TV and the component video outputs of your device.

While connecting, be sure that the

letters on your TV, “

”, “

” correspond with your device’s connectors.

SCART 2

inputs or outputs for external devices.

REAR VIEW

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p65

21.07.2008, 18:33

Summary of Contents for LCD32761HDF


















































Search results

Summary of Contents for LCD32761HDF

Reviews:

Related manuals for LCD32761HDF

Brands by name

Popular brands

ACOUSTIC SOLUTIONS LCD32761HDF, Operating Instructions Manual

Search results

Summary of Contents for LCD32761HDF

Reviews:

Related manuals for LCD32761HDF

Brands by name

Popular brands