ACOUSTIC SOLUTIONS KW-TB001, Instruction Manual

Page: 8 / 11

14 15
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Specification
Power Working voltage 110V-240V AC / 50~60Hz
Standby power consumption <0.5W
Audio Output 12W+12W+25W (RMS)
Frequency response 20Hz~20KHz
Bluetooth Version Bluetooth 2.1
Profiles HFPV 1.5, A2DPV 1.2, AVRCPV 1.4
HSP 1.2, GAVDP 1.2, IOP
Frequency range 2.4GHz-2.480GHz
FM radio Frequency range 87.5-108MHz
Technical Information
LINE in mode
If you are not already in Line in mode, briefly press and release the control ring on the left
hand side (Mode) on the Tower speaker or ‘Input’ on the remote control, until you are in Line
in mode. ‘LINE in’ will be displayed.
1. Connect an audio cable (not supplied) to the Audio Output Jacks (White = Left / Red =
Right) on the external device (DVD player, TV ect) to the rear of the Tower speaker.
2. Turn on your external device and begin playback of your selected media.
To gain optimal volume levels, adjust the output volume level on both the secondary device
and on the Tower speaker.
Volume (Tower speaker)
Turn the volume control clockwise to increase the volume and anti clockwise to decrease the
volume.
Volume (Remote control)
Press and release to increase the volume in steps
Press and hold to progressively increase the volume.
Volume - Press and release to decrease the volume in steps
Press and hold to progressively decrease the volume.
LINE in mode