ACOUSTIC SOLUTIONS DAB31-A, Instruction Manual

Page: 7 / 28

7
Switch on
Press and release the ‘Standby’ button. The display will fully switch on and your Radio will
return to the mode that it was last used in (DAB/FM). If you were listening to a radio station
before then this station will be automatically selected.
Note: Always make sure that the aerial is fully extended, to ensure the maximum signal
strength and the best possible sound quality.
Switch off
Press and release the ‘Standby’ button. The Radio will go into Standby mode.
To completely switch off the Radio and the display, slide the On/Off switch on the back of the
radio to ‘Off’ and switch off the mains power at the wall socket.
Note: If you are using this product on battery power, it is recommended that you always
completely switch off the radio, using the ‘On/Off’ switch on the back. This will ensure that
you get the maximum battery life from the rechargeable battery.
Change the mode
Briefly press and release the ‘Mode’ button to change modes. DAB and FM radio modes are
available. Please check the display, which will confirm the mode.
Adjusting the volume
Turn the volume rotary control anti-clockwise to decrease the volume and clockwise to
increase the volume. When you adjust the volume, please check the display which will
confirm the volume setting.
Using headphones
You can connect headphones with a 3.5mm plug (not included) to your Radio. The stereo
headphone socket can be back of the Radio. When you have headphones connected the
Radio speakers are switched off and all sound is via the headphones.
Note: Always keep the volume within reasonable limits.
Using your DAB/FM Radio