ACOUSTIC SOLUTIONS DAB31-A, Instruction Manual

Page: 16 / 28

16
Setting the time and date
The first time you listen to DAB radio, the time and date of your product will be synchronised
automatically to that broadcast by the DAB service in 24 hour mode; which is in line with
daylight saving, but you can set the time and date manually.
In DAB or FM mode:
1. Press and hold the ‘Menu’ button until ‘DAB <Full scan>’ is displayed.
2. Use the rotary ‘Tune/Select’ control to scroll to ‘<System>’. Press the rotary ‘Tune/Select’
control to select.
3. Use the rotary ‘Tune/Select’ control to scroll to ‘<Time>’. Press the rotary ‘Tune/Select’
control to select. ‘<Set Time/Date>’ is displayed. Press the rotary ‘Tune/Select’ control to
select.
4. ‘Set time’ is displayed and the hour digits will flash. Use the rotary ‘Tune/Select’ control to
scroll to the correct hour. Press the rotary ‘Tune/Select’ control to select.
5. The minutes will now flash. Use the rotary ‘Tune/Select’ control to scroll to the correct
minutes. Press the rotary ‘Tune/Select’ control to select.
6. ‘Set date ’ is displayed and the day will flash. Use the rotary ‘Tune/Select’ control and
press to select to set the day, month and year, using the same method as you did to set
the time.
When you confirm the correct date, ‘Time Saved’ is displayed and the display returns to
<Set Time/Date>’.
You can now use the rotary ‘Tune/Select’ control to scroll and the same method as you did to
set the time and date to change the settings for:
• 12/24 hour clock display
• The date format, DD-MM-YYYY or MM-DD-YYYY
• To auto update the time from the DAB signal, FM signal, DAB or FM signal or no update.
Setting the alarm
Note: Check that the radio has the correct time and date before you set an alarm.
In DAB or FM mode:
1. Press and hold the ‘Menu’ button to enter the menu options..
2. Use the rotary ‘Tune/Select’ control to scroll to ‘<System>’. Press the rotary ‘Tune/Select’
control to select.
3. Use the rotary ‘Tune/Select’ control to scroll to ‘<Alarm 1>’ or ‘<Alarm 2>’ as required.
Press the rotary ‘Tune/Select’ control to select.
4. ‘Alarm 1 (or 2) Setup’ is displayed. Press the rotary ‘Tune/Select’ control to select.
5. ‘Alarm 1 (or 2) Wizard On time’ is displayed and the hour digits for the alarm will flash.
Set the time and date